Taper bit eji maka jaak hama 32mm 34mm 35mm 36mm ogologo uwe mwụda onu 7 bọtịnụ 7 degrees
DTH Hammer
| Akụrụngwa | alloy ígwè na tungsten carbides site okpomọkụ forging ọgwụgwọ |
| Bọtịnụ/ndụmọdụ&nha | 4,5,6,7,8;0711/0710mm |
| Taper akụkụ | 7 Celsius/11°/12° |
| Ogologo uwe elu | 50-55mm,60-70mm,75mm-80mm |
| Socket n'ime dayameta | 22/23/25mm |
| Ụdị bọtịnụ | ballistic, bọtịnụ okirikiri |
| Agba | Blue, uhie, odo, nwa |
| ngwugwu | igbe osisi ma ọ bụ igbe plastik nwere iberibe 50 ma ọ bụ 100 iberibe |
| Nhazi | Anyị nwere ike chepụta dị ka ihe ndị ahịa chọrọ na eserese si dị, gụnyere nọmba bọtịnụ, ụdị bọtịnụ, na oghere ịgbapụta. |
| Dayameta | Nọmba bọtịnụ | Akụkụ | Ogologo | Ibu | ngwugwu | |
| mm | inch | iberibe | ° | mm | kg | PC/igbe |
| 28 | 1 1/8" | 4 | 7°/11°/12° | 65-69 | 0.20 | 50 |
| 30 | 1 3/16” | 4 ~ 6 | 7°/11°/12° | 65-69 | 0.20-0.30 | 50 |
| 32 | 1 1/4" | 4 ~ 7 | 7°/11°/12° | 65-69 | 0.20-0.30 | 50 |
| 34 | 1 11/32” | 4-8 | 7°/11°/12° | 65-69 | 0.20-0.30 | 50 |
| 35 | 1 3/8" | 7-8 | 7°/11°/12° | 65-69 | 0.22-0.40 | 50 |
| 36 | 1 13/32” | 4-8 | 7°/11°/12° | 65-69 | 0.30-0.40 | 50 |
| 38 | 1 1/2" | 4-8 | 7°/11°/12° | 65-69 | 0.30-0.40 | 50 |
| 40 | 1 9/16” | 4-8 | 7°/11°/12° | 65-69 | 0.30-0.42 | 50 |
| 41 | 1 5/8" | 4-8 | 7°/11°/12° | 65-69 | 0.30-0.42 | 50 |
| 42 | 1 21/32” | 4-8 | 7°/11°/12° | 65-69 | 0.30-0.46 | 50 |
